| Author |
Remember the Transfomer Batmobile request... |
inzo
Posts: 388
Location: joliet, Illinois
Joined: 14.01.06
 |
| Posted on 26-03-2006 19:09 |
|
|
Hows this for an Idea fellow Batmobile Mechanics...
What do you think???
Can it be done???
::yellowrazz::::yellowrazz::::yellowrazz::
Edited by inzo on 26-03-2006 22:37 |
  
|
| Author |
RE: Remeber the Transfomer Batmobile request... |
spencer1984
Posts: 1271
Location: Upstate NY
Joined: 30.06.05
|
| Posted on 26-03-2006 19:59 |
|
|
|
That actually looks pretty decent - better than some official TFs. Were you able to hook things together with the magnet points? |
|
|
| Author |
RE: Transformer Batmobile... |
inzo
Posts: 388
Location: joliet, Illinois
Joined: 14.01.06
|
| Posted on 26-03-2006 22:34 |
|
|
Actually I just laid the Batmobile flat onto my carpet as you can see...
I have not even connected the parts together yet...
I was hoping one of us Batmobile mechanics would take up the
idea and see if it could be done...::yellowyes::::yellowyes::::yellowyes::
I will try it out this week; but to find the right parts to complete it...::yellowupset::::yellowupset::::yellowupset::
The Batman head was cut off of a Batman The Animated Series
soap bottle...::yellowrazz::::yellowrazz::::yellowrazz::
Edited by inzo on 26-03-2006 22:36 |
|
|
| Author |
RE: Remember the Transfomer Batmobile request... |
Panzer
Posts: 369
Location: Garland, TX
Joined: 14.01.06
|
| Posted on 27-03-2006 00:01 |
|
|
hmmmmmmmmmmmmmmmmmm,
Man that be awesome if it well work. To see about making it work would have to see the toy and take it apart. I dont have that batmobile. So not for sure?
Be freaking Awesome if it works thoe!
John Hinton
Panzer's MySpace |
|
|
| Author |
RE: Remember the Transfomer Batmobile request... |
spencer1984
Posts: 1271
Location: Upstate NY
Joined: 30.06.05
|
| Posted on 27-03-2006 10:51 |
|
|
My 3-in-1 Batmobile got parted out, so I probably won't be trying it::yellowrazz::
If you're looking for joints to connect everything together, check out the LEGO Bionicle line - lots of cool ball and sockets there, and they should be stout enough to hold things together. I picked up a set to use for a custom a while back, but unfortunately it's stll on the drawing board. |
|
|
| Author |
RE: Thanks... |
inzo
Posts: 388
Location: joliet, Illinois
Joined: 14.01.06
|
| Posted on 27-03-2006 19:14 |
|
|
I will do it...::yellowyes::::yellowyes::::yellowyes::
To the Batmobile...::thebatmanmobile::::thebatmanmobile::::thebatmanmobile::
|
|
|
